|
Manual Installation
Quick, easy, safe,
manual, installation.
|
Mechanized Installation
The MANTA RAY Anchors can be installed using a wide
range of commonly available construction vehicles.
|
|
INSTALLATION EQUIPMENT
Drive Steel:
Drive steel and accessories are available from Foresight Products for all Manta Ray and Stingray anchors in basic
lengths of 3 feet, 6 feet, and 8 feet. Multiple sections are coupled together with specialized couplers to achieve
the required depth of installation. Manta Ray and Stingray drive steel are not interchangeable.
Load Locking Kits
For Manta Ray, the LL-1 is a 10-ton fast acting jack with an 8-inch stroke. The direct reading gauge and rod gripping
jaws make load locking easy and quick. For high capacity Stingrays, the LL-40 is a 20-ton jack with a 10-inch
stroke. The base and jack are self-aligning to the actual installed angle of the anchor. Both kits require open
center hydraulic flow of 2 to 8 gallons per minute and a maximum pressure of 2,000 psi. A power supply is not
included with these load-locking kits, it must be provided separately. Foresight Products models GPU18-8 or GPU-2
are suitable for the LL-1. GPU18-8 is required for the LL-40. |
 |
|
