Manual Installation
UTILITY GUY ANCHORING SYSTEM:
QUICK, EASY, SAFE INSTALLATION |
|
|
|
|
| Anchor rod is screwed into the threaded shackle of the anchor and the firstsection
(radius drive tip) of the drive steel set is inserted into the anchor. |
One man at ground level using a standard jack hammer drives the MANTA RAY
into the soil at the desired angle and depth. |
Installer pulls the drive steel out of the ground and screws adaptor setting
bar onto the end of the anchor rod. |
|
|
|
|
| Anchor locker base and hydraulic ram system are placed over adapter setting
bar. |
Power source operates the anchor locker, gripping the adapter setting bar,
rotating the anchor underground into its locked position, proof loading anchor to the holding capacity required. |
Anchor locker is removed, the thimble eye is screwed onto the anchor rod
ready for guying. No digging, no damage, no mess. A clean, simple and safe operation. |
HYDRAULIC POWERED ANCHOR LOCKERS:
THE DISTINCT ADVANTAGE OF THE MANTA RAY SYSTEM -
INSTALLATION AND TESTING ARE SIMULTANEOUS. |
|
|
|
|
| Manufactured from high grade metals, sections of the drive steel are coupled
together so that the driving operation can be accomplished safely from ground level. |
Anchor locker pulls up on the anchor to set it in the ground at the desired
holding capacity. Portable and lightweight, the anchor locker consists of a base plate and hydraulic ram. |
Desired holding capacity is measured by the guage on the anchor locker.
NO MORE GUESSWORK!
|
